Room E216, Chuangyi Park, Fuqian Road, Guanlan Zhangge, Longhua District, Shenzhen, China
Home ProductsMobile Signal Repeater

60dB Gain Triple Wide Band Gsm Signal Repeater 20dBm 1000sqm Coverage Manual Gain Control

60dB Gain Triple Wide Band Gsm Signal Repeater 20dBm 1000sqm Coverage Manual Gain Control

60dB Gain Triple Wide Band Gsm Signal Repeater 20dBm 1000sqm Coverage Manual Gain Control

Product Details:

Place of Origin: China
Brand Name: Lenolink
Certification: ISO
Model Number: LSR20-lte

Payment & Shipping Terms:

Minimum Order Quantity: 5pcs
Price: Negotiation
Packaging Details: Packing with bracket 1 PC /box
Supply Ability: 1000pcs/month
Contact Now
Detailed Product Description
Output Power: 20dBm Gain: 60dB
Coverage: 200sqm Frequency: GSM900, DCS1800, WCDMA2100
Key Words: Mobile Phone Signal Booster

20 dBm Triple Wide Band Signal booster cover 60dB gain 1000sqm
 
 
Description

Lenolink provides a series of products to support different applications and customized your requirement. The output power level is 10dBm, 20dBm, 25dBm, 30dBm and 43dBm. Triple band repeater can support GSM900, DCS1800 and WCDMA2100 in one housing, so that can amplify tree systems at the same time.

 

A mobile phone signal repeater provides the ultimate solution in any indoor area where cellular communications can not work well due to leak of signals (but outdoor signal good). The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones.


Design Advantage
1. Support wide band to cover all operators.
2. Manual gain control (MGC) available for both uplink and down link to adjust the gain value for proper coverage during installation or maintenance.
3. To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
4. Optional auto shut off design available for both uplink and downlink to avoid serious interference to network effectively when the repeater is in deep self-oscillation or very strong input power.
5. Very low power consumption.
6. Support single, dual, triple and quad systems with one housing.

7. Metal housing, professional design.

 

Specification:

Electrical specification Uplink Downlink
Frequency Range GSM 880 ~ 915 MHz 925 ~ 960 MHz
DCS 1710 ~ 1785 MHz 1805 ~ 1880 MHz
WCDMA 1920 ~ 1980 MHz 2110 ~ 2170 MHz
Max .Gain ≥ 55dB ≥ 60dB
≥ 65dB ≥ 65dB
≥ 65dB ≥ 70dB
≥ 70dB ≥ 75dB
≥ 75dB ≥ 75dB
≥ 75dB ≥ 80dB
Max .Output Power ≥ 10dBm ≥ 10dBm
≥ 12dBm ≥ 15dBm
≥ 15dBm ≥ 20dBm
≥ 15dBm ≥ 23dBm
≥ 20dBm ≥ 27dBm
≥ 20dBm ≥ 30dBm
Band width (-3dB) Wide Band
MGC ≥ 31dB / 1dB step
ALC ≥ 15dB, auto shut off after 15dB
Gain Flatness GSM&CDMA Tpy≦ 6dB(P- P); DCS,PCS≦ 8dB(P-P)
WCDMA ≦ 2dB/ 3. 84MHz,Ful l Band≦ 5dB(P-P)
Noise Figure ≤6dB
VSWR ≤1.8
Group Delay ≤0.5μs
Frequency Stability ≦ 0.01ppm

Spurious Emission &
Output inter-modulation

GSM Meet ETSI TS 151 026
WCDMA Meet 3GPP TS 25.143
CDMA Meet IS95 & CDMA2000
WCDMA System Spurious Emission Mask Meet 3GPP TS 25. 143
Modulation Accuracy ≦ 12.5%
PCDE ≦ -35dB@Spreading Factor 256
CDMA System Rho ρ> 0.980
ACPR Meet I S95 & CDMA2000
LED Alarm Standard
Power LED Green light when power on.
ALC LED Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB,
LED off after 5 seconds red color
Mechanical Specifications Standard
I /O Port N-Female
Impedance 50 ohm
Operating Temperature -25ºC~+55ºC
Environment Conditions IP40
Dimensions ≤20dBm 250x125x52mm;
>20dBm 250x220x52mm
Weight ≤20dBm ≤ 2.0Kg;
>20dBm ≤ 3.2Kg;
Power Supply Input AC90~264V

 

 

Our factory:

60dB Gain Triple Wide Band Gsm Signal Repeater 20dBm 1000sqm Coverage Manual Gain Control

Contact Details
Lenolink Telecommunication Co.,Ltd

Contact Person: Zhou

Tel: 18588206016

Send your inquiry directly to us (0 / 3000)

Other Products