70dB Gain Mobile Signal Repeater 20dBm Dual Bnad Manual Gain Control AC90~264V

Product Details:

Place of Origin:	China
Brand Name:	Lenolink
Certification:	ISO
Model Number:	LSR20-lte

Payment & Shipping Terms:

Minimum Order Quantity:	5pcs
Price:	Negotiation
Packaging Details:	Packing with bracket 1 PC /box
Supply Ability:	1000pcs/month

Contact Now

Detailed Product Description

Output Power:	20dBm	Gain:	70dB
Coverage:	1000sqm	Frequency:	Lte1800
Key Words:	Mobile Phone Signal Booster

Mobile Signal Repeater with LCD 20dBm Dual Bnad Wide Band 70dB Gain ceverage 1000

Description
This dual mobile phone signal amplifier significantly improves the performance of any cellular device experiencing weak signal inside of buildings! It provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. it can help reduce drop calls and improve GSM voice communication quality. Using a large external antenna and an indoor repeater, this GSM signal booster boosts signals sent by both your phone and the cell tower.

The dual band repeater supports any two wireless system at one housing. Lenolink provides a series of products to support different applications and customized your requirement. The output power level is 10dBm, 20dBm, 25dBm, 30dBm and 43dBm.

Specification:

Electrical specification				Uplink	Downlink
Frequency Range		GSM		880 ~ 915 MHz	935 ~ 960 MHz
		WCDMA		1920 ～1980MHz	2110MHz ~2170MHz
Max .Gain				≥ 55dB	≥ 60dB
				≥ 65dB	≥ 65dB
				≥ 65dB	≥ 70dB
				≥ 70dB	≥ 75dB
				≥ 75dB	≥ 75dB
				≥ 75dB	≥ 80dB
Max .Output Power				≥ 10dBm	≥ 10dBm
				≥ 12dBm	≥ 15dBm
				≥ 15dBm	≥ 20dBm
				≥ 15dBm	≥ 23dBm
				≥ 20dBm	≥ 27dBm
				≥ 20dBm	≥ 30dBm
Band width (-3dB)				Wide Band
MGC				≥ 31dB / 1dB step
ALC				≥ 15dB, auto shut off after 15dB
Gain Flatness			GSM&CDMA	Tpy≦ 6dB(P- P); DCS,PCS≦ 8dB(P-P)
			WCDMA	≦ 2dB/ 3. 84MHz,Ful l Band≦ 5dB(P-P)
Noise Figure				≤6dB
VSWR				≤1.8
Group Delay				≤0.5μs
Frequency Stability				≦ 0.01ppm
Spurious Emission & Output inter-modulation				GSM Meet ETSI TS 151 026
				WCDMA Meet 3GPP TS 25.143
				CDMA Meet IS95 & CDMA2000
WCDMA System		Spurious Emission Mask		Meet 3GPP TS 25. 143
		Modulation Accuracy		≦ 12.5%
		PCDE		≦ -35dB@Spreading Factor 256
CDMA System		Rho		ρ> 0.980
		ACPR		Meet I S95 & CDMA2000
LED Alarm				Standard
Power LED				Green light when power on.
ALC LED				Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB, LED off after 5 seconds red color
Mechanical Specifications				Standard
I /O Port				N-Female
Impedance				50 ohm
Operating Temperature				-25ºC~+55ºC
Environment Conditions				IP40
Dimensions	≤20dBm			250x125x52mm;
	>20dBm			250x220x52mm
Weight	≤20dBm			≤ 2.0Kg;
	>20dBm			≤ 3.2Kg;
Power Supply				Input AC90~264V

Design Advantage
1. Support wide band to cover all operators.
2. Manual gain control (MGC) available for both uplink and down link to adjust the gain value for proper coverage during installation or maintenance.
3. To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
4. Optional auto shut off design available for both uplink and downlink to avoid serious interference to network effectively when the repeater is in deep self-oscillation or very strong input power.
5. Very low power consumption.
6. Support single, dual, triple and quad systems with one housing.